Oricom TA2000 Series manual Clock Settings, Setting Caller ID Display Format

8 USING THE ANSWERING MACHINE 9

Clock Settings

Set the alarm

Set the time

The

icon is displayed when the alarm is set.

1

Press

,

then

scroll

or

,

or

press

to

1 Press

, then scroll

or

, or press

to select

select set TIME and press

.

CLOCK

SET TIME and press

.

to select ALARM and

2

Scroll

or

, or

press

to

select

2

Scroll

or

, or press

SETTING and press

.

press

.

to select ON or OFF and press

3

Enter the time using the keypad,

press

to

toggle

3

Scroll

or

.

AM/PM (for 12 hour clock) and press

to confirm.

4

Enter the alarm time and press

to confirm.

For 12-hour-format, press

to toggle AM/PM.

Setting Caller ID Display Format

1 Press , then scroll or , or press to

select SET TIME and press .

2 Scroll or , or press to select DISPLAY

FORMAT and press .

3 Scroll or to select 12/24 hour format and

press	.	to select DD/MM (day/month) or
4 Scroll	or

MM/DDonly(month/day) format and press to confirm.

Your Touch answering machine is switched on and ready to use within a few seconds of connecting to the mains power. It has 3 mailboxes with up to 13 minutes recording time (shared between the mailboxes) and can store up to a maximum of 50 messages.

If you do not wish to use the mailbox feature, and just use the Touch like a simple answer machine with all the messages recorded in one place, you do not need to do anything, and all messages will be recorded in Mailbox one.

When using your Touch answering machine you will hear helpful voice prompts to guide you through the operations. When the answer machine keypad is idle, the backlight will be off, and you must touch the keypad to wake it up before it will respond to key presses.

Switching the answer machine on/off

1 With the answer machine keypad active, press to display and hear the current setting.

2 Press to switch between answering machine on and off. The message counter displays ON or OF accordingly and you will hear either “Answer machine is Off” or “Answer machine is On”.

3 When the setting you require is announced and displayed, wait for the answering machine to return to standby mode.

If no buttons are pressed for 10 seconds the answer machine will automatically return to standby mode. When in standby mode, the answer machine’s digital display will show the total number of new messages stored.

When switched on your Touch answering machine will answer calls after a specific number of rings (ring delay) and play callers the selected outgoing message (OGM). If you have selected the ‘Answer and Record’ OGM, callers can then leave a message for you in your mailbox which you can listen to at a convenient time.

Messages can be up to 60 seconds long. The minimum message length is 1 second. With the answering machine switched on you can still make and receive calls as normal until the answering machine takes a call.

Answering machine menu structure

Ao - Set answer mode	- Ring delay
C - Remote access code	H - Set time

E - record OGM1/ OGM2 / Memo in mailbox.