20 | SIMPLE SOLUTIONS | 21 |
|
Make internal call
1 Press 
and scroll 
or 
then press 
, or enter the handset number directly you want to call.
2 The called handset rings and can press 
to answer the call.
3 Press 
to end the call.
Transfer an external call |
| ||
1 During a call, press . |
| ||
2 Scroll | or | then press | , or enter the handset |
number directly you want to call. |
| ||
3 The called handset can press | to answer. The calling | ||
handset can press | to transfer the call. | ||
While one handset is on an external call, a second internal handset can join in and have a
1onlyDuring an external call, press .
2 Scroll or then press 
, or enter the handset number directly you want to call.
3 The called handset can press 
to answer. The calling
handset can press 
to start the conference call.
4 Either internal handset can press 
at any time to leave the conference call.
How does the ‘Touch Activated Keypad’ work?
The touch activated keypad will automatically disable when you hold the handset receiver to your ear. The idea being, to reduce the risk of accidental keypad presses while the phone is held against the side of your face. Likewise, the keypad also disables automatically 5 seconds after the last key press. To ‘wake’ the keypad to enable you to dial further digits, e.g. if you want to access the menu, you should touch any of the number keys, wait for the backlight to come on and then you can dial normally. It is very easy to tell when the keypad is disabled, as the keypad backlight will not be on.
Troubleshooting
If you are experiencing problems with your Oricom Touch Phone, firstly check that:
•the telephone line cord is correctly connected.
•the mains power cord is correctly connected and the power switched on.
•the batteries are charged, polarities are correct and that the batteries are not in need of replacing.
If you have more than one handset registered to your base remember to check the connections on this too. If you are still experiencing a problem, you are likely to find a solution in the following:
Cannot make a call
•Is the
symbol missing? - move closer to the base.
•Is 
symbol displayed? if so unlock the keypad, see page 6.
•If you have
Interference on the Touch when on a call
•If you have Broadband installed you MUST install high quality line filters (not supplied) on all phone sockets. This is not a problem with your Touch phone.
Handset does not ring/ring is low
•Check the ringer volume level, see page 5.
Handset is not charging properly
•Check that the handset is sitting correctly in the base or charger. Clean the charging contacts with a dry cloth.
Buzzing noise on my radio, TV, computer or hearing aid
•Sometimes your phone may interfere with other electrical equipment if it is placed too close. We recommend you leave a distance of at least one metre to avoid this.