Telephone operation 13
Telephone operation
Make a call
1.Press [
].
2.Dial the phone number after you hear the dial tone.
Predial a call
1.Dial the phone number using the keypad. If you make an error while dialling, you can press [
] to erase the last digit entered.
2.Press [
].
Answer a call
Press [
] to answer an incoming call.
When there is an incoming call, the screen and keypad backlight will be on.
Note:
The screen shows the elapsed time as you talk (in hours, minutes and seconds).
End a call
Press [
] or place the handset in the telephone base
or charger to end a call.
Speakerphone
Anytime during a call, press [
] to switch between speakerphone and normal handset use. When the speakerphone is active, the handset screen shows [
].
Note:
Using the speakerphone will drain the battery
faster than the normal handset use.
Volume control
You can adjust the volume of the handset or speakerphone anytime during a call.
On the handset, press [
] to increase or [
] to decrease the volume.
Note:
Only the listening volume can be adjusted.
Make a call using the redial memory
The last 10 telephone numbers previously dialled are stored in the redial list (up to 24 digits each).
1.Press [
].
2.[
]/[
]: select the desired phone number 
] to dial.