
Advanced settings 27
Advanced settings
Call Barring
This feature allows you to bar outgoing calls.
1.[].
2.[]/[
]: ADV SETTING
].
3.[]/[
]: CALL BARRING
].
4.Enter the PIN (default: 0000) ].
5.[]/[
]: MODE
].
6.[]/[
]: select [ON] or [OFF]
].
7.[]/[
]: NUMBER
].
8.[]/[
]: select[NUMBER 1], [NUMBER 2] or [NUMBER 3]
].
9.ENTER NUMBER ].
Notes:
"CALL BARRING" will be displayed on the handset screen when it is set as ON.
3.[]/[
]: PIN
].
4.Enter the old code (default: 0000) ].
5.Enter the new code ].
6.CONFIRM CODE: enter the new code again ]. “STORED” will be displayed on HS screen when it is changed successfully.
Registering a handset
The telephone system can support up to a total of 5 cordless handsets. Handsets that were included with your main base are
To add or
1.Press and hold [] on the base for 5 seconds until a beep sounds.
2.Press [] when handset displays REGISTER YOUR HANDSET.
3.Enter the PIN (default: 0000) ].
A beep sounds on the handset when the registration is successful and displays “REGISTERED” on HS screen.
PIN
The default PIN is 0000. To change the PIN:
1.[].
2.[]/[
]: ADV SETTING
].
Notes:
An error tone will sound if the registration is not successful.