Answering system 31
Note:
If you select TOLL SAVER, the system answers after the second ring if there are new messages, or after the fourth ring if there is no new message. This allows you to check your system to see if there are new messages before incurring toll charges.
Security code for remote access
Your answering system allows you to program a
security code is 0000.
To view the current remote code:
1.[
].
2.[
]/[
]: ANS SYSTEM 
].
3.[
]/[
]: SETTINGS 
].
4.[
]/[
]: REMOTE CODE 
].
5.[
]: VIEW CODE. The screen displays the current remote code.
4.[
]/[
]: REMOTE CODE 
].
5.[
]/[
]: CHANGE CODE 
].
6.Use the dial key pad to enter a new 
].
7.Enter the code again 
].
Call screening
When the answering system answers a call, you can listen at the telephone base while the caller leaves a
message.
At the telephone base:
The message automatically plays on the telephone
base. Use the [
] button to adjust speaker volume.
From a cordless handset:
1.[
]. The caller’s voice will be heard while the answering system is recording the message.
2.To intercept during handset screening, press [
] button on the handset. The answering system will automatically stop recording when you do so.
To change the remote code:
1.[
].
2.[
]/[
]: ANS SYSTEM 
].
3.[
]/[
]: SETTINGS 
].
Message playback using the telephone base
1.Press [
] on the telephone base to listen to the messages, the number of messages will be displayed on the base screen.