Oricom ECO800 manual White pages directory

Page 3

IMPORTANT

Persons with pacemakers should seek advice from their doctor before using this product.

Avoid exposure of this telephone to moisture or liquid.

To prevent electric shock, do not open the handset or base cabinet.

Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors.

There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the mains supply and telephone socket during a storm.

Do not use the handset in an explosive hazard area such as where there is gas leaking.

Follow the local regulations regarding the disposal of your packing materials, exhausted batteries and used phone. Wherever possible, recycle those materials.

We advise that this phone should not be used near intensive care medical equipment.

Clean with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents.

Because the phone works by sending radio signals between base station and handset, wearers of hearing aids may experience interference in the form of a humming noise. The telephone is compatible with most popular hearing aids on the market. However, due to the wide range of hearing aids available, there is no guarantee that the telephone will function "problem free" with every model.

Your phone can interfere with electrical equipment such as answering machines, TV and radios, clock radios and computers if placed too close. It is recommended that you position the base unit at least one metre from such appliances.

Warnings and Safety Information

This telephone complies with applicable safety requirements for exposure to radio waves (EMR). The mean power of this telephone does not exceed 20mW limit at which point testing is required.

The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items.

This telephone is not designed for making emergency telephone calls when the mains power fails. Always have a corded phone available to be able to make and receive calls to emergency services if the mains power fails.

Do not use your telephone during an electrical storm thunderstorm as it is possible to get an electric shock. Refer to information contained in

White pages directory.

This phone is designed for connection to a PSTN telephone line or an analogue extension port of a PBX system. If you connect this device to a digital extension of a PBX, damage may result to the PBX.

CAUTION

Use only the mains adaptors supplied with this product. Incorrect ! adaptor polarity or voltage can seriously damage the unit.

Adaptor for base unit: eco80

Input: 100-240VAC 50/60Hz 200mA

Output: 6VDC 300mA eco800

Input: 100-240VAC 50/60Hz 200mA

Output: 6VDC 500mA

This telephone is capable of producing very high volume levels when the "Boost" is switched on and the volume control is set to maximum. Extreme caution should be taken if the handset is to be shared between users with normal hearing and those with hearing impairments.

1

Image 3
Contents Eco series Table of Contents White pages directory Installation Handset. Slide the battery door firmly into placeGetting Started If any of these are missing, please contact Oricom directly Purchasing additional handsetsOGM Eco800Eco80 Cordless handset Operating the TelephoneOperating the Telephone SecConfiirm it Navigating in the menuTelephone TelephoneChain dialling Deactivate handsfree mode Adjusting the Handsfree volumeTelephone Handset Ringer melody Using the menuCurrent setting is shown Handset Ringer volumeSelect and confirm on or OFF Using the menuBase Ringer volume Select and confirm a ringing tonePhone Book Caller ID Caller IDSelect an entry ServiceConfirm or Cancel Displaying calls list entriesAnswer & Rec or Answer Only mode Set the answer delayMachine on or off Play/Pause Stop Rewind Fast forward Set the date and time SecCheck the date and time Record a memoUsing the Answering Machine eco800 Only Deletes all old messagesMemory Full Remote Access eco800 Only PIN Code for remote accessChanging the PIN code Using Remote Access eco800 Only Advanced Settings Advanced SettingsActivates conference call Required handsetHS2 HandsetRemove HS? Troubleshooting TroubleshootingTroubleshooting Default settings Default SettingsTelephone Answering Machine Technical Properties Technical PropertiesMaintenance/Guarantee Warranty AustraliaCustomer Support REN RN for New Zealand Index IndexIndex Warranty Australia Page Australia Customer Support