Getting Started
Installation
1.Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply.
2.Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket.
3.Insert 2 rechargeable
1.2V 800mAh batteries (included), 
observing the correct polarity, into the battery compartment on the
handset. Slide the battery door firmly into place.
4.Place the handset on the charging cradle and charge the batteries for a full 15 hours before using it for the first time.
Note:
It may take some time for the cordless handset to power up, and it may get warm during initial charge. This is normal.
It is good practice to put the cordless handset on the charging cradle when it is not in use to ensure that the handset is always fully charged.
WARNING
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Never use
•Never use alkaline or lithium batteries.
•Do not dispose of the batteries in a fire, as they can explode.
•Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to the eyes or skin. It can be toxic if swallowed.
•Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns.
•Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin.
•Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion.
•Remove the batteries if you do not plan to use the product for several months at a time.
•Follow the local regulations regarding the disposal of your packing materials, exhausted batteries and used phone. Wherever possible, recycle those materials.
2