![](/images/new-backgrounds/1200399/20039949x1.webp)
The Answering Machine
1.Press for 2 seconds.
2.Start recording after the beep.
TIP: For better audio quality, speak into the microphone of the base unit when recording.
3.Press to stop recording or recording will stop after 2 minutes. The recorded memo will play back automatically for review.
Playing the memo
1.Press during standby.
2.Press to stop playback or it will stop when the memo is finished.
TIP: The memo will also playback when you are listening to the ICM.
Deleting the memo
1.Press during memo playback. The memo is deleted.
NOTE: Deleted memo cannot be recovered.
CALL SCREENING
Call screening allows you to hear the caller while they are is leaving a message. You can then decide if you want to talk to the caller directly.
1.Press during standby.
The answering machine emits one beep for On, and two beeps for Off.
MESSAGE ALERT
Message alert gives you an indication that you have new message(s) saved in the answering machine. You will hear a short beep periodically.
1.Press during standby.
The answering machine emits one beep for On, and two beeps for Off.
ADJUSTING THE PLAYBACK VOLUME
You can adjust the volume of call screening and message playback.
1.Press to increase or decrease the volume.
SETTING RING DELAY
Ring delay is the number of rings your phone will ring before the answering machine picks up the call. This setting only applies when your answering machine is switched on. You can change this setting to 2 – 7 rings or toll saver.
25