Oricom ECO600 Select Settings Æ ANS Machine Æ Ring DELAY. Press, Changing your remote access code

The Answering Machine

1.Press on the handset.

2.Select SETTINGS Æ ANS MACHINE Æ RING DELAY. Press .

3.Select the new setting. Press . The new setting is saved.

TIP: Toll Saver. Toll saver is a cost effective way to manage your messages when accessing your answering machine remotely. When toll saver is selected, your answering machine will pick up the call after 2 rings if you have new messages or 4 rings if you have no new message.

REMOTE ACCESS

You can operate your answering machine when you are away from home by calling your phone from a touch tone phone and entering a 3-digit remote access PIN code.

Changing your remote access code

The remote access PIN code is used for operating your answering machine remotely. The pre-set RA PIN code is 000. You can personalize the RA PIN code for greater security.

NOTE: The REMOTE ACCESS (RA) PIN is different from your 4-digit system PIN.

1.Press on the handset.

2.Select SETTINGS Æ ANS MACHINE Æ RA PIN CODE. Press .

3.Enter your current RA PIN code (Pre-set: 000). Press .

4.Enter a new 3-digit RA PIN code. Press .

5.Enter the new 3-digit RA PIN code again for verification.

6.Press . The new setting is saved.

Accessing your ANSWERING SYSTEM remotely

1.Make a call to your phone.

2.Press * when OGM starts playing.

3.Enter your RA PIN code. You now have access to your answering machine.

NOTE: You have 3 tries to enter the correct remote access PIN code before your phone hangs up.

4.Press a key to carry out a function. See the Remote Access Commands Tables in the Appendix for a list of available functions.

TIP: Press 5 to stop the current operation and re-start from the beginning.

NOTE: Your phone will hang up automatically if no key is pressed for 8 seconds.

26