Oricom ECO600 manual Environment and Safety

Page 3

Environment and Safety

Battery requirements

Each handset requires two rechargeable Ni-MH batteries, size AAA 1.2V 650mAh (HR10/44).

WARNING: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product.

Never use Alkaline or lithium batteries.

Do not dispose of the batteries in a fire, as they can explode.

Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to the eyes or skin. It can be toxic if swallowed.

Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns.

Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin.

Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion.

Remove the batteries if you do not plan to use the product for several months at a time.

Warnings

Avoid exposure of this telephone to moisture or liquid.

To prevent electric shock, do not open the handset or base cabinet.

Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors.

Do not use the handset in an explosive hazard area such as where there is gas leaking.

Do not use your telephone during an electrical thunderstorm as it is possible to get an electric shock. Refer to information contained in the White Pages Directory.

As there is a slight chance that the telephone could be damaged by an electrical storm, it is recommended that users unplug the phone from the mains supply and telephone socket during an electrical storm.

Follow the local regulations regarding the disposal of your packing materials, exhausted batteries and used phone. Wherever possible, recycle those materials.

We advise that this phone should not be used near intensive care medical equipment or by persons with pacemakers.

Clean with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents.

Because the phone works by sending radio signals between base station and handset, wearers of hearing aids may experience interference in the form of a humming noise.

Your phone can interfere with electrical equipment such as answering machines, TV and radio sets, clock radios and computers if placed too close. It is recommended that you position the base unit at least one metre from such appliances.

This telephone complies with applicable safety requirements for exposure to radio waves (EMR). The mean power of this telephone does not exceed 20mW limit at which point testing is required.

The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items.

This telephone is not designed for making emergency telephone calls when the mains power fails. Always have a corded phone available to be able to make and receive calls to emergency services if the mains power fails.

Privacy of communications may not be ensured when using this telephone.

Environmental

The Ni-MH batteries supplied with this product may be able to be recycled once they are unable to recharge during normal operation. Always observe your local Council /State regulations regarding the disposal of your packaging materials, exhausted batteries, and old equipment. Always recycle where possible.

3

Image 3
Contents ECO600 Series Environment and Safety Table of ContentsEnvironment & Safety Environment and Safety Welcome What’s in the Box?About your phone Answering Machine On/Off key Taking a glance at the menus Browsing the menusGetting Started Connecting Your ChargerPlace the handset on the base unit or charger for charging Pre-dialing Switching off your handsetSwitching on your handset CallCalling from the incoming call log Adjusting the earpiece volumeRedialing the last number Calling from your phonebookTake two different calls at the same time Caller IDWhile you are on the phone Multi-Handset operationText and Numbers Erasing a single characterErasing all characters Phonebook Select Phonebook Æ ADD RECORD. PressSearching a record Select Phonebook Æ Edit RECORD. Press Returning a call Call LogSelect Display Æ Handset NAME. Press Select Sound Æ Handset or Baseæ MELODYor VOLUME. PressSelect Sound Æ Handset Æ VOLUME. Press Custom OptionsCalling Features Extra FeaturesSelect Settings Æ Auto ANSWER. Press Clearing the voicemail indicator SystemRetrieving voicemails Changing the System PIN Select System Æ Change PIN. PressResetting to Factory Default Settings Listening to the current OGM Setting the default OGMAnswering Machine Recording an OGMDeleting all old ICM Deleting an OGMPlaying ICM Deleting an ICMDeleting the memo Playing the memoAccessing your Answering System remotely Select Settings Æ ANS Machine Æ Ring DELAY. PressSelect Settings Æ ANS Machine Æ RA PIN CODE. Press Changing your remote access codeAppendix Remote Access CommandsREN RN for New Zealand Warranty AustraliaCustomer Support