Call
3.Place the handset on the base unit or charger for charging.
NOTE: Handset may get warm during initial charge. This is normal. The handset may take a few seconds to power up.
CHECKING THE BATTERY LEVEL
The battery icon displays the current battery level.
= 100% full | = 60% full | = 30% full | = Empty requires charging. |
If you are on the phone while the battery is nearly flat, you will hear warning tones. Your call may be cut off shortly after the warning.
WHAT IS STANDBY MODE?
Your phone is in standby mode when it is idle. The standby screen displays the handset name and number, the signal icon, and the battery icon.
SETTING YOUR PHONE’S COUNTRY
If you have bought this phone in New Zealand you will need to select your country in order for it to work properly according to your country’s standards. If you are in Australia you can skip this instruction as the phone factory default is Australia.
1.After the phone is fully charged press 
during standby mode.
2.Enter the country code.
Country | Code |
AUSTRALIA | 23 |
NEW ZEALAND | 168 |
3.Press 
. Your phone is now ready to use.
CHECKING THE SIGNAL STRENGTH
The signal icon 
displays the link status between your handset and the base unit. A steady icon means your handset and the base unit are linked. A flashing icon means your handset and the base unit are not linked.
If you move too far away from the base unit while you are on the phone, you will hear warning tones notifying you that your handset is almost out of range – lost link. Take your handset closer to the base unit or your call may be cut off shortly after the warning.
NOTE: If your handset has lost the link with the base, you will not be able to make or receive calls. You will also not be able to carry out many of the phone functions and features.
9