Sennheiser SDC 8000 system manual Options, Setting the max. number of interpreter booths/languages

Page 86

Configuring the SDC 8000 system

Interpretation 4 Options

Options

1 Max # Booths

Options

2 Max # Desks

Attention!

If – after having loaded an interpreter configuration – you have to re- initialize the interpreter consoles, for example because you had to remove or add consoles, it is vital to reset the interpretation system!

Options

The “Options” menu item on the “Interpretation” menu allows you to configure the basic features of your interpretation system:

yThe max. number of interpreter booths or languages

yThe max. number of interpreter consoles per booth

yThe operating mode between the interpreter booths

yThe operating mode within the interpreter booths

You can connect a total of 28 booths with up to eight interpreter consoles each to a single central unit, i.e. you can realize an interpretation system with up to 224 interpreter consoles.

Setting the max. number of interpreter booths/languages

You have to configure an interpreter booth for each language offered:

From the central unit’s operating menu, choose “Interpretation”, “Options” and “Max # Booths” one after the other.

The current number of booths is shown on the display.

Set the max. number of booths/languages for your interpretation system and press the ENTER key to save your setting.

Note!

The maximum number of configurable languages also depends on your license. The configuration of two languages is license-free. In order to be able to configure more than two languages, you have to purchase one of the language licenses available (see “Licenses” on page 103).

Example:

Let us assume that the active languages at a conference are English, German and French. You then have to configure your system so that it comprises an “English” booth, a “German” booth and a “French” booth.

Setting the max. number of interpreter consoles per booth

To set the max. number of interpreter consoles per booth:

From the central unit’s operating menu, choose “Interpretation”, “Options” and “Max # Desks” one after the other.

The current number of interpreter consoles is shown on the display.

Set the desired number of interpreter consoles and press the ENTER key to save your setting.

Example:

Let us assume that the active languages at a conference are English, German and French and that two interpreters are available for each

86

Image 86

Contents SDC Thank you for choosing Sennheiser Contents Via a PA system Configuring the interpretation system 100 Appendix a Safety information SDC 8000 the digital conference and interpretation system Overview of the components SDC 8000 system Conference consoles$!# Technology used Consoles All consoles featureComponents of the SDC 8000 system in detail Interpreter console features SDC 8000 D conference unit SDC 8000 C chairman unit SDC 8000 DC conference unit SDC 8000 CC chairman unit SDC 8000 DV conference unit Vote LEDSDC 8000 CV chairman unit SDC 8000 ID interpreter console Autofloor LEDSDC 8000 CU central unit SDC 8000 AO analog output unit optional System cables Operating the delegate units Direct Access modeOperating the components SDC 8000 system Taking the floor / Making a request to speakOperating the components of the SDC 8000 system On your console go off Turning off the microphone / Cancelling a request to speak With request modeWith Req. No clear mode Selecting an interpretation channel VotingOperating the chairman unit Using the chip card slot of a conference consoleOperating the VIP units Turning all active conference consoles off priorityStarting a voting session Assigning a participant the speaking rightRequest Configuring the B-channel of an interpreter console Operating the interpreter consolesUsing the interpreter console Operating the central unit Switching between the A-channel and the B-channelAdjusting the volume of the consoles’ built-in loudspeakers Muting the microphone of the interpreter consoleOperating control Menu level F1, F2 and F3 menu keysMenu operating controls Working with the central unit’s operating menu Interconnecting up to 10 central units Interconnecting the conference/interpreter consolesConnecting cable strings to a central unit Structuring the SDC 8000 systemExpansion stage 1 one central unit with up to 15 consoles Expansion stage 2 one central unit with up to 90 consolesDetermining maximum cable lengths Structuring an interpretation system Calculating the voltage drop on the system cablesMode between booths Override Selectable modes between or within interpreter boothsMode between booths Mixed Mode between booths Toggle OverrideAuto-floor function Mode in booths MixedMode in booths Override ExampleAUTO-FLOOR Using external equipment Connecting external audio sourcesStructuring the SDC 8000 system Setting up the SDC 8000 system Preparing the SDC 8000 system components for set upConnecting a cable string to the central unit Interconnecting the SDC 8000 system componentsInterconnecting the consoles Interconnecting several central unitsConnecting additional equipment Turning the central units on and offCarrying out remote conferences Connecting PA systems, recording units, etc Pin assignment of the 9-pole sub-D socket AUX OUTDaisy-chaining SDC 8000 AO analog output units Connecting a PC to the central unit Start display Configuring the SDC 8000 systemIntroduction to the central unit’s operating menu Six main menusEnter Exit Submenus of the Conference menu part 1 Submenus of the Conference menu part 2 Submenus of the Conference menu part 3 Submenus of the Conference menu part 4 Submenus of the Conference menu part 5 Submenus of the Conference menu part 6 Submenus of the Interpretation menu part 1 Submenus of the Interpretation menu part 2 Submenus of the Interpretation menu part 3 Submenus of the Interpretation menu part 4 Submenus of the Interpretation menu part 5 Submenus of the Aux-In/Out menu part 1 EnterSubmenus of the Aux-In/Out menu part 2 Submenus of the Aux-In/Out menu part 3 Submenus of the Aux-In/Out menu part 4 Submenus of the Aux-In/Out menu part 5 Submenus of the Aux-In/Out menu part 6 Submenus of the System menu part 1 Submenus of the System menu part 2 Submenus of the Language and the License menu part 1 Turning on the central unit for the first time Settingthe volume of theconsoles’ built-inloudspeakersConfiguring the conference system Automatically initializing all conference consolesManually initializing all conference consoles Reserving a microphone number Selecting a conference mode Setting the speaker limit Adjusting the audio settings for the consoles’ microphones Resetting the conference systemTesting the consoles’ built-in loudspeakers Testing the consoles’ microphonesWorking with the interpreter configuration Configuring the interpretation systemConfiguring the display of the voting options Creating a new interpreter configuration Modifying the currently active interpreter configuration Loading a previously saved interpreter configurationOptions Setting the max. number of interpreter booths/languagesSetting the max. number of interpreter consoles per booth Configuring the operating mode between booths Configuring the operating mode within a boothConfiguring the second target language B-channel of a booth Configuring the language options for the interpreter boothsConfiguring the main target language A-channel of a booth Enabling the auto-relay interpretation function Auto-floor ENG To transmit the selected booth number to Adding interpreter consoles to an existing configuration Resetting the interpretation system Choosing the audio inputs and outputs Configuring the audio inputs and outputsAdjusting the volume of the audio outputs Turning the audio inputs or outputs on and off Configuring the audio outputs for remote conferencingAssigning a channel to an audio output Configuring the outputs of the SDC 8000 analog output unit Adjusting the input level of an audio inputAdjusting the input sensitivity of an audio input OUT Checking the communication within a cable string Configuring connected additional componentsMaking a system diagnosis Camera controlConfiguring an ambient sound console Software, language and license Choosing the language of the central unit’s operating menuDisplaying the central unit’s serial number Replacing a fuse If problems occurMaintenance and care Conference/interpreter console does not workAccessories SDC 8000 C SpecificationsSDC 8000 D SDC 8000 DC SDC 8000 CCSDC 8000 DV SDC 8000 CVSDC 8000 ID 108 SDC 8000 AO analog output unit RJ 45 cableSyntax of the commands Appendix a Camera control protocolCommands Notation of the general syntaxCommands Appendix B Control panel protocol113 Appendix C Repeater for the SDC 8000 system 114115 Approval