Sennheiser SDC 8000 system manual To transmit the selected booth number to

Page 91

Configuring the SDC 8000 system

Full Init

Press ENTER to save

01 ENG

02 ARA

00 00 00 00

FLO FLO FLO FLO

Initialize Units 1 Full Init

Press the RELAY 1 key of the desired interpreter console and keep it pressed.

While keeping the RELAY 1 key pressed, press the “MENU ” or

	“MENU ” menu selection key			until the desired booth number
	(BOOTH) is shown on the display.

	Press Mic to confirm
	BOOTH	DESK
	02	01

Press the MICRO key		to transmit the selected booth number to the
	central unit.

Note!

If an error occurs during initialization, the text “Init Refused” is shown on the displays of the interpreter consoles. In this case, re- initialize the interpreter consoles.

If all booth and desk numbers are assigned correctly, press the ENTER key on the central unit to save this configuration.

The displays of the interpreter consoles show the languages assigned to the A-channel and the B-channel and other related information (see example illustration on the left).

The interpreter consoles are now ready for operation.

Note!

The max. number of interpreter consoles per booth has to be configured via the central unit (see “Setting the max. number of interpreter consoles per booth” on page 86 and “Half-automatically initializing all interpreter consoles on the central unit” on page 90).

Manually assigning an interpreter console an individual desk number (interpreter console number)

To manually assign an interpreter console an individual desk number (DESK):

From the central unit’s operating menu, choose “Interpretation”, “Initialize Units” and “Full Init” one after the other.

Press the RELAY 3 key of the desired interpreter console and keep it pressed.

While keeping the RELAY 3 key pressed, press the “MENU ” or

“MENU ” menu selection key		until the desired desk number is
shown on the display.

Press Mic to confirm
BOOTH	DESK
01	02

91

Image 91

Contents SDC Thank you for choosing Sennheiser Contents Via a PA system Configuring the interpretation system 100 Appendix a Safety information SDC 8000 the digital conference and interpretation system Conference consoles Overview of the components SDC 8000 system$!# Technology used Components of the SDC 8000 system in detail All consoles featureConsoles Interpreter console features SDC 8000 D conference unit SDC 8000 C chairman unit SDC 8000 DC conference unit SDC 8000 CC chairman unit Vote LED SDC 8000 DV conference unitSDC 8000 CV chairman unit Autofloor LED SDC 8000 ID interpreter consoleSDC 8000 CU central unit SDC 8000 AO analog output unit optional System cables Taking the floor / Making a request to speak Direct Access modeOperating the components SDC 8000 system Operating the delegate unitsOperating the components of the SDC 8000 system On your console go off With Req. No clear mode With request modeTurning off the microphone / Cancelling a request to speak Voting Selecting an interpretation channelTurning all active conference consoles off priority Using the chip card slot of a conference consoleOperating the VIP units Operating the chairman unitAssigning a participant the speaking right Starting a voting sessionRequest Operating the interpreter consoles Configuring the B-channel of an interpreter consoleUsing the interpreter console Muting the microphone of the interpreter console Switching between the A-channel and the B-channelAdjusting the volume of the consoles’ built-in loudspeakers Operating the central unitMenu operating controls F1, F2 and F3 menu keysOperating control Menu level Working with the central unit’s operating menu Structuring the SDC 8000 system Interconnecting the conference/interpreter consolesConnecting cable strings to a central unit Interconnecting up to 10 central unitsExpansion stage 2 one central unit with up to 90 consoles Expansion stage 1 one central unit with up to 15 consolesDetermining maximum cable lengths Calculating the voltage drop on the system cables Structuring an interpretation systemMode between booths Toggle Override Selectable modes between or within interpreter boothsMode between booths Mixed Mode between booths OverrideExample Mode in booths MixedMode in booths Override Auto-floor functionAUTO-FLOOR Connecting external audio sources Using external equipmentStructuring the SDC 8000 system Preparing the SDC 8000 system components for set up Setting up the SDC 8000 systemInterconnecting several central units Interconnecting the SDC 8000 system componentsInterconnecting the consoles Connecting a cable string to the central unitTurning the central units on and off Connecting additional equipmentCarrying out remote conferences Pin assignment of the 9-pole sub-D socket AUX OUT Connecting PA systems, recording units, etcDaisy-chaining SDC 8000 AO analog output units Connecting a PC to the central unit Six main menus Configuring the SDC 8000 systemIntroduction to the central unit’s operating menu Start displayEnter Exit Submenus of the Conference menu part 1 Submenus of the Conference menu part 2 Submenus of the Conference menu part 3 Submenus of the Conference menu part 4 Submenus of the Conference menu part 5 Submenus of the Conference menu part 6 Submenus of the Interpretation menu part 1 Submenus of the Interpretation menu part 2 Submenus of the Interpretation menu part 3 Submenus of the Interpretation menu part 4 Submenus of the Interpretation menu part 5 Enter Submenus of the Aux-In/Out menu part 1Submenus of the Aux-In/Out menu part 2 Submenus of the Aux-In/Out menu part 3 Submenus of the Aux-In/Out menu part 4 Submenus of the Aux-In/Out menu part 5 Submenus of the Aux-In/Out menu part 6 Submenus of the System menu part 1 Submenus of the System menu part 2 Submenus of the Language and the License menu part 1 Automatically initializing all conference consoles Settingthe volume of theconsoles’ built-inloudspeakersConfiguring the conference system Turning on the central unit for the first timeManually initializing all conference consoles Reserving a microphone number Selecting a conference mode Setting the speaker limit Resetting the conference system Adjusting the audio settings for the consoles’ microphonesTesting the consoles’ microphones Testing the consoles’ built-in loudspeakersConfiguring the display of the voting options Configuring the interpretation systemWorking with the interpreter configuration Creating a new interpreter configuration Loading a previously saved interpreter configuration Modifying the currently active interpreter configurationSetting the max. number of interpreter consoles per booth Setting the max. number of interpreter booths/languagesOptions Configuring the operating mode within a booth Configuring the operating mode between boothsConfiguring the main target language A-channel of a booth Configuring the language options for the interpreter boothsConfiguring the second target language B-channel of a booth Enabling the auto-relay interpretation function Auto-floor ENG To transmit the selected booth number to Adding interpreter consoles to an existing configuration Resetting the interpretation system Adjusting the volume of the audio outputs Configuring the audio inputs and outputsChoosing the audio inputs and outputs Assigning a channel to an audio output Configuring the audio outputs for remote conferencingTurning the audio inputs or outputs on and off Adjusting the input sensitivity of an audio input Adjusting the input level of an audio inputConfiguring the outputs of the SDC 8000 analog output unit OUT Camera control Configuring connected additional componentsMaking a system diagnosis Checking the communication within a cable stringConfiguring an ambient sound console Choosing the language of the central unit’s operating menu Software, language and licenseDisplaying the central unit’s serial number Conference/interpreter console does not work If problems occurMaintenance and care Replacing a fuseAccessories SDC 8000 D SpecificationsSDC 8000 C SDC 8000 CC SDC 8000 DCSDC 8000 CV SDC 8000 DVSDC 8000 ID 108 RJ 45 cable SDC 8000 AO analog output unitAppendix a Camera control protocol Syntax of the commandsNotation of the general syntax CommandsAppendix B Control panel protocol Commands113 114 Appendix C Repeater for the SDC 8000 systemApproval 115