RECORDING THE OUTGOING
ANNOUNCEMENT
For best results when recording, you should be about 9 inches from the microphone, and eliminate as much background noise as possible.
1.Press and hold the ANNOUNCE button. You need to hold the button until you finish the announcement.
2.Begin talking after you hear the beep.
3.Release the button when you finish your announcement.
If you choose not to record an outgoing announcement, a default announcement will play. To return to the default announcement after you have recorded your own outgoing announcement, press the ANNOUNCE button and release it when you hear the beep.
Sample Outgoing Announcement
Hi, this is (use your name here), I can't answer the phone right now, so please leave your name, number and a brief message after the tone, and I'll get back to you. Thanks.
REVIEWING ANNOUNCEMENT
•Press and release ANNOUNCE button to review your outgoing announcement.
| MESSAGES |
| 88 |
| PLAY/STOP |
REVIEW | SKIP |
ANNOUNCE | ANSW ON/OFF |
MEMO | PAGE |
| ERASE |
Microphone ANNOUNCE button
10