Radio Shack ET-1118 owner manual Setting the Dialing Mode, Setting the Ringers’ Volume

Page 11

If the battery pack becomes weak during a call, the handset beeps every 3 seconds and Low Bat- tery flashes. If this happens, you cannot make another call on the phone until you recharge the battery pack.

About once a month, fully discharge the battery pack by keeping the handset off the base until Low Battery flashes. Otherwise, the battery pack loses its ability to fully recharge.

If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.)

If you are not going to use your phone for an extended period of time, disconnect the battery pack. This increases the battery pack’s usable life.

The supplied battery pack should last for about a year. When it loses its ability to fully recharge, order a replacement battery pack from your local RadioShack store (see “Replacing the Battery Pack” on Page 28).

SETTING THE DIALING MODE

Set DIAL MODE on the back of the base for the type of service you have. If you are not sure which type you have, once

the battery pack is fully charged, do this test.

1.Be sure DIAL MODE is set to T (tone).

DIAL MODE

2.Lift the handset, press TALK, and listen for a dial tone.

TALK

3. Press any number except 0.

Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code number ei- ther.

If the dial tone stops, you have touch- tone service. Leave DIAL MODE set to T.

If the dial tone continues, you have pulse service. Set DIAL MODE to P (pulse).

Setting the Ringers’ Volume

The ET-1118 lets you set different vol- umes for the handset and base ringers.

11

Image 11
Contents ET-1118 Features Important Caller ID Information FCC Statement Read this Before InstallationContents Replacing the Battery Pack FCC Wants You to Know On a Desk Top InstallationMounting the Phone On a Wall Plate or Wall Ring VOL F-LO-HI Connecting and Charging the Battery Pack Setting the Ringers’ Volume Setting the Dialing ModeLow or Ringer High Turning Caller ID/ Call Waiting ON/OFF Using Auto TalkStoring Your Area Code Making and Receiving Calls with the Handset Adjusting Handset VolumeSwitching Between the Handset and Speaker Telephone OperationUsing Redial Using Both Handset SpeakerphoneUsing Mute Using HoldUsing PAGE/INTERCOM Using FlashTransferring a Call between the Handset and Base Memory DialingStore Name appears Storing a Number in the Handset’s MemoryStoring a Number in the Base’s Memory Editing or Deleting a Number in the Handset’s MemoryDialing a Memory Number Chain-Dialing Service NumbersEntering a Pause Reviewing Memory Numbers Handset OnlyTesting Stored Emergency Numbers Using a HeadsetReviewing Caller ID Records Caller ID OperationCaller ID Messages Storing a Caller ID Record to the HANDSET’S MemoryDeleting Caller ID Records Problem Suggestion TroubleshootingProblem Suggestion Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowPage Page RadioShack