4.Route the adapter’s cord through the strain relief slot on the bottom of the base.
RING VOL |
OF |
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
2.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base.
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack.
On a Wall Plate or Wall
1.Insert the two tabs at the top of the narrow end of the supplied bracket into the base’s upper tab slots as shown, then press down on the bracket’s latches and insert them into the lower slots.
RING VOL |
OF |
4.Route the adapter and modular cords through the grooves on the bracket.
RING VOL
OF
8