Radio Shack ET-1118 owner manual Important Caller ID Information

Page 3

Security Access-Protection Code — automatically prevents other cordless phone users from using your phone line while the handset is off the base.

Redial — lets you quickly redial the last number dialed.

Flash — sends an electronic switch- hook signal for use with special phone services, such as Call Waiting.

Tone/Pulse Dialing — lets you use ei- ther type of service, and you can easily switch from pulse to tone dialing for long-distance,bank-by-phone, or other special services.

Auto Talk — lets you set the handset so you can answer a call by simply lifting the handset from the base or by press- ing any key when the handset is away from the base.

Hearing-Aid Compatibility — lets you use your phone with hearing aids that have a T (telephone) switch.

This telephone is UL listed and has been tested and found to comply with all applicable FCC standards.

We recommend you record your phone’s serial number here. The num- ber is on the bottom of the base.

Serial Number __________________

IMPORTANT CALLER ID INFORMATION

To use the phone’s Caller ID and Caller ID with Call Waiting features, you must be in an area where those services are available and you must subscribe to those services through your local phone company.

Where Caller ID is offered, one or more options are generally available:

caller’s number only

caller’s name only

caller’s name and number

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION

!

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that important operating and ! maintenance instructions are included in the literature accom-

panying this product.

3

Image 3
Contents ET-1118 Features Important Caller ID Information FCC Statement Read this Before InstallationContents Replacing the Battery Pack FCC Wants You to Know Installation Mounting the PhoneOn a Desk Top On a Wall Plate or Wall Ring VOL F-LO-HI Connecting and Charging the Battery Pack Setting the Ringers’ Volume Setting the Dialing ModeLow or Ringer High Turning Caller ID/ Call Waiting ON/OFF Using Auto TalkStoring Your Area Code Making and Receiving Calls with the Handset Adjusting Handset VolumeSwitching Between the Handset and Speaker Telephone OperationUsing Redial Using Both Handset SpeakerphoneUsing Mute Using HoldUsing PAGE/INTERCOM Using FlashTransferring a Call between the Handset and Base Memory DialingStore Name appears Storing a Number in the Handset’s MemoryStoring a Number in the Base’s Memory Editing or Deleting a Number in the Handset’s MemoryDialing a Memory Number Chain-Dialing Service NumbersEntering a Pause Reviewing Memory Numbers Handset OnlyTesting Stored Emergency Numbers Using a HeadsetReviewing Caller ID Records Caller ID OperationCaller ID Messages Storing a Caller ID Record to the HANDSET’S MemoryDeleting Caller ID Records Problem Suggestion TroubleshootingProblem Suggestion Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowPage Page RadioShack