Radio Shack ET-1118 owner manual FCC Wants YOU to Know, Lightning

Page 29

THE FCC WANTS YOU TO KNOW

In the unlikely event that your phone causes problems on the phone line, the phone company can temporarily discon- tinue your service. If this happens, the phone company attempts to notify you in advance. If advance notice is not practi- cal, the phone company notifies you as soon as possible and advises you of your right to file a complaint with the FCC.

Also, the phone company can make changes to its lines, equipment, opera- tions, or procedures that could affect the operation of this telephone. The tele- phone company notifies you of these changes in advance, so you can take the necessary steps to prevent interrup- tion of your telephone service.

Your phone might cause TV or radio in- terference even when it is operating properly. To determine whether your phone is causing the interference, turn off your phone. If the interference goes away, your phone is causing it. Try to eliminate the interference by:

moving your phone away from the receiver

connecting your phone to an AC outlet that is on a different electrical circuit from the receiver

contacting your local RadioShack store for help

If you cannot eliminate the interference, the FCC requires that you stop using your phone.

Some cordless telephones operate on frequencies that might cause interfer- ence to nearby TVs and VCRs. To mini- mize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR.

LIGHTNING

Your telephone has built-in lightning pro- tection to reduce the risk of damage from surges in telephone line and power line current. This lightning protection meets or exceeds FCC requirements. However, lightning striking the tele- phone or power lines can damage your telephone.

Lightning damage is not common. Nev- ertheless, if you live in an area that has severe electrical storms, we suggest that you unplug your phone during storms to reduce the possibility of dam- age.

29

Image 29
Contents ET-1118 Features Important Caller ID Information FCC Statement Read this Before InstallationContents Replacing the Battery Pack FCC Wants You to Know On a Desk Top InstallationMounting the Phone On a Wall Plate or Wall Ring VOL F-LO-HI Connecting and Charging the Battery Pack Setting the Ringers’ Volume Setting the Dialing ModeLow or Ringer High Turning Caller ID/ Call Waiting ON/OFF Using Auto TalkStoring Your Area Code Switching Between the Handset and Speaker Adjusting Handset VolumeTelephone Operation Making and Receiving Calls with the HandsetUsing Mute Using Both Handset SpeakerphoneUsing Hold Using RedialUsing PAGE/INTERCOM Using FlashTransferring a Call between the Handset and Base Memory DialingStore Name appears Storing a Number in the Handset’s MemoryStoring a Number in the Base’s Memory Editing or Deleting a Number in the Handset’s MemoryEntering a Pause Chain-Dialing Service NumbersReviewing Memory Numbers Handset Only Dialing a Memory NumberTesting Stored Emergency Numbers Using a HeadsetReviewing Caller ID Records Caller ID OperationCaller ID Messages Storing a Caller ID Record to the HANDSET’S MemoryDeleting Caller ID Records Problem Suggestion TroubleshootingProblem Suggestion Care and Maintenance Replacing Battery Pack Lightning FCC Wants YOU to KnowPage Page RadioShack