Memory Dialing

To page the base from the handset, press INTCM. Paging Base appears, and the base and handset ring. Press SPEAKER or INTERCOM on the base to answer the page. Intercom appears on the handset’s display.

SPEAKER

INTERCOM

To page the handset from the base, press INTERCOM. The handset and base ring, and Paging appears on the handset’s display. Press TALK or INTCM on the handset to answer the page. In- tercom appears.

To end an intercom call, press TALK on the handset, press SPEAKER on the base, or hang up the handset.

If a call comes in during an intercom conversation, either the person at the base or the person at the handset can answer the call. Press TALK on the handset or SPEAKER on the base once to end the intercom call, then press TALK or SPEAKER again to answer the incoming call.

Note: The intercom does not operate if the party being paged is already on a call.

Transferring a Call between the Handset and Base

You can use the ET-1118’s intercom feature to transfer a call between the handset and the base.

To transfer a call from the handset to the base, press INTCM. The call is put on hold, and Paging Base and Hold ap- pear. When the person at the base an- swers, press TALK. The call is released from hold and transferred to the base. To return to handset use, press TALK again.

To transfer a call from the base to the handset, press INTERCOM. The call is put on hold, and Paging and Hold ap- pear on the handset’s display. When the person with the handset answers, press SPEAKER. The call is released from hold and transferred to the handset. To return to base use, press SPEAKER again.

You can store up to 20 numbers in memory (10 each in the handset’s and base’s memory), then dial a stored num- ber by pressing a memory location num- ber. You can also store a name with each number in the handset’s memory.