At any time except during a call, press 
or 
to set the handset’s ringer vol- ume. The phone rings at the selected volume and the display shows Ringer
Low or Ringer High.
To set the base’s ringer volume, set RING VOL on the back of the base to OFF, LO, or HI. When you set RING VOL to OFF, the base (and the handset if it is on the base) does not ring but the other phone connected to the same line rings. If the handset is away from the base, the handset also rings.
RING VOL
pressing any key when the handset is away from the base.
Follow these steps to turn auto talk on or off.
1.Lift the handset then hold down CALL ID. A menu appears with Auto Talk selected.
CALL ID
SELECT
2. Press SELECT to change the auto talk setting. On or Off appears indicating the selected setting.
3.To clear the display, press CALL ID or return the handset to the base.
TURNING CALLER ID/ CALL WAITING ON/OFF
Note: When you set the auto talk func- tion to off, the handset rings when you lift the handset from the base. See “Us- ing Auto Talk.”
USING AUTO TALK
Your phone is preset so you must press TALK when you lift the handset from the base to answer a call. With auto talk turned on, you can answer a call by just lifting the handset from the base or by
If you have Call Waiting with Caller ID service, you can set the
Follow these steps to turn the Caller ID/ Call Waiting feature on or off.
1.Lift the handset then hold down
CALL ID.
2.Press 2 or 
to select CIDCW (Caller ID/Call Waiting).
12