Radio Shack 43-3856 owner manual Operation, Making and Receiving Calls

Operation

1.Press and hold the FLASH until you hear a confirmation tone.

2.To set the dial mode for pulse dialing, press #.

Or to set the dial mode for tone dialing, press

∗/tone.

You hear a confirmation tone to indicate the setting is complete.

OPERATION

MAKING AND RECEIVING CALLS

Even when you turn off the base’s ringer, you can still make or receive calls using this phone. Telephones on the same line and the handset (if its ringer is not turned off) still ring when there is an incoming call.

Action	Handset On Base	Handset Off Base
To	Pick up the handset	Press talk/FLASH,
receive		any number, ∗/tone
	(Auto Talk).
a call		or #.
	1)Pick up the handset.	1)Press talk.
	2)Press talk.	The TALK/BATT
To	The TALK/BATT	LOW LED flashes
	LOW LED flashes	and turns on.
make a
	and turns on.	2)Listen for the dial
call
	3)Listen for the dial	tone.
	tone.	3)Dial the number.
	4)Dial the number.
To hang	Press end or return the handset to the base
up	(Auto Standby).
	1)Pick up the handset.	1)Press talk.
	2)Press talk.	2)Listen for the dial
To	3)Listen for the dial	tone.
redial	tone.	3)Press REDIAL/
	4)Press REDIAL/	PAUSE.
	PAUSE.

12