Radio Shack 43-3856 owner manual Remote access away from home, Command Function

The Integrated Answering Device

Ô NOTE Ô

•The system will only playback messages for four minutes and then it returns to command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds.

•You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

2.To stop recording, press or memo rec. You hear a confirmation tone.

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message. Ô

1.Call your telephone number.

2.During the greeting message, press 0 and enter your PIN code. (See “Setting a Personal Security Code”, page 21).

3.The answering system announces the current time and the number of messages stored in memory. Then you hear “To play incoming messages, press 02. For help, press 10”.

4.You may continue to listen to the Help Guidance, or you may select a command from the following chart. Ô

Command	Function
0 then 1	Repeat a Message
0 then 2	Playing Incoming Messages
0 then 3	Skipping a Message
0 then 4	Deleting a Message
0 then 5	Stop Operation
0 then 6	Answering System On
0 then 7	Memo Record/Stop*
0 then 8	Greeting Message Record/Stop*
0 then 9	Answer System Off
1 then 0	Help Guidance

30