Radio Shack 43-3856 owner manual Installation, On a Desk Top, Mounting the Phone

Page 7

INSTALLATION

MOUNTING THE PHONE

You can place the phone on a desk or table, mount it on a standard wall plate, or directly on a wall. Choose a location that is:

•near an AC outlet

•near a modular telephone line jack

•out of the way of normal activities

•away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and room monitors

•away from other cordless phones

You can try different locations to see which provides the best performance.

Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store or online at RadioShack.com), or have the telephone company update the wiring for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules. The USOC number of the jack to be installed is RJ11C (RJ11W for a wall plate).

On a Desk Top

DC IN 9V TEL LINE

1. Plug one end of the

 

supplied long

 

modular cord into the

 

TEL LINE jack on the

 

base’s back.

 

2. Plug the modular cord’s other end into a modular telephone line jack.

CAUTION

You must use a

!Class 2 power source that

supplies 9V DC and delivers at least 350 mA. Its center tip must be set to positive and its plug must fit the phone's DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.

•Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the phone.

Installation

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
With Answering Machine 4GHz Cordless PhoneContents Important Safety Instructions Contents Battery Safety Instructions Introduction Read this Before InstallationIntroduction On a Desk Top InstallationMounting the Phone On a Wall Plate or Wall CONNECTING, Charging and Replacing the Battery Pack Installation Recycling Ni-Cd Batteries Depending on your dialing system, set the mode as followsMaking and Receiving Calls OperationHandset Ringer Tone Earpiece VolumeTemporarily Mute Ringer Selecting a Different Channel Traveling OUT-OF-RANGEFlash and Call Waiting Chain Dialing Memory DialingStoring Phone Numbers in Memory Making Calls with Memory DialingStoring the Speed Dial Ô Testing Stored Emergency NumbersErasing a Stored Number from Memory ONE-TOUCH Speed DialMaking Calls with the Speed Dial Integrated Answering DeviceDeleting the Speed Dial Turning the Answering System FeaturesSetting UP Your Answering System Using the Menu ModeSetting the Time Setting the Ring Time Setting a Personal Security Code PINSelecting the message Record Time Announce only featureSetting the Message Alert tone Selecting the Language Choosing between the two outgoing messages Setting Your Outgoing Message GreetingPreset message Recording a personal outgoing message Greeting ÔAdjusting the speaker volume level Setting the base ringer volumeTemporarily Mute the Base Ringer Playing your messages Using Your Answering SystemRepeating a message Deleting a message Skipping a messageRecording a conversation Voice memoCommand Function Remote access away from homeTurn on the answering system remotely To attach the beltclip Installing the Optional BeltclipHeadset Installation Additional InformationProblem Solution TroubleshootingIncoming messages may be too long. Remind callers to FCC Statement CareFCC Statement Surge ProtectionPage Page Page Limited One-Year Warranty
Top Page Image Contents