Radio Shack TAD 1130 owner manual Important Safety Instructions, Troubleshooting

Page 3

43-1130.fm Page 3 Tuesday, May 30, 2000 1:22 PM

Adjusting the TAD’S Volume

19

Deleting Messages

19

Setting the Remote Operation Pin

19

Remote Operation

20

Using the Toll-Saver

20

Using Remote Commands

20

Remote Commands

21

Troubleshooting

22

Care

23

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

 

CAUTION

!

 

RISK OF ELECTRIC SHOCK.

 

DO NOT OPEN.

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that important operating and ! maintenance instructions are included in the literature accom-

panying this product.

This phone has been tested and found to comply with all applicable UL and FCC stan- dards.

IMPORTANT SAFETY

INSTRUCTIONS

When using your telephone equipment, ba- sic safety precautions should always be fol- lowed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Never install telephone wiring during a lightning storm.

4.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

5.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the net- work interface.

6.Use caution when installing or modifying telephone lines.

7.Do not affix the AC power supply cord to building surfaces with metal fittings (if the product has an AC power cord).

8.Unplug this product from the wall outlet before cleaning. Do not use liquid clean- ers or aerosol cleaners. Use a damp cloth for cleaning.

3

Image 3
Contents TAD GHz Digital Spread Spectrum Cordless Speakerphone Contents Troubleshooting Important Safety InstructionsFm Page 4 Tuesday, May 30, 2000 122 PM Battery Safety Instructions Save These Instructions Read this Before InstallationFCC Statement Features FCC Wants YOU to KnowLightning Answering System Features Telephone FeaturesInstallation Mounting the PhoneOn a Desk Top On a Wall Plate or Wall CONNECTING, CHARGING, and Replacing the Battery Pack Installation Quick Look AT the Handset Setting the Dialing ModeTurning the BASE’S Ringer on and OFF Setting the Ringer TONE/VOLUMESetting the Number of Rings Setting the DAY/TIMETelephone Operation Using Tone Services on a Pulse Line Using FlashUsing Redial Using MuteEntering a Pause Using a HeadsetChain-Dialing Service Numbers Testing Stored Emergency Num- bersRECORDING/DELETING AN Outgoing Message Setting the Record TimeTAD Operation Selecting the Outgoing MessageRecording Incoming Messages Setting the TAD to Answer CallsScreening Calls Recording a MemoDeleting Messages Adjusting the TAD’S VolumeSetting the Remote Operation PIN Playing MessagesUsing the TOLL-SAVER Using Remote CommandsRemote Operation Press # Then Remote CommandsProblem Suggestion TroubleshootingCare Limited One-Year Warranty