Radio Shack 43-3598, 43-3529 owner manual Using AN Optional Handset, Charging the Battery Pack

Page 30

Using an Optional Handset

CAUTION

You must use a Class 2 power source that supplies 9V DC and delivers at least 210 mA. Its center tip must be set to positive and its plug must fit the charger DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the handset or the adapter.

Always connect the AC adapter to the charger before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the charger.

Ô NOTE Ô

If you mounted the base on the wall, place the handset with the keypad facing out.

You must re-register the optional handset each time you change the original unit’s digital security code.

If you set CW Deluxe on the optional handset to

On while CIDCW on the base handset is set to Off, the Caller ID/Call Waiting information does not appear on the optional handset, but you can still recall and use the CW Deluxe menu.

3.Press # or to move the cursor to Yes. Then press SEL/CH or DEL/TRSF. The phone beeps to indicate the record is deleted.

USING AN OPTIONAL HANDSET

You can add up to eight additional handsets (Cat. No. 43-3538 [black] or 43-3597 [white], available from RadioShack) to your system.

CHARGING THE BATTERY PACK

The charger is powered by the supplied 9V, 210 mA AC adapter. Insert the supplied AC adapter's barrel plug into the DC IN 9V jack on the back of the charger. Route the cord through the strain relief slot and plug the adapter into a standard AC Outlet.

Be sure you have connected the battery pack as described in "Connecting and Charging the Battery Pack" on Page 9. Then place the handset on the charger. The CHARGE indicator on the charger lights. Total:0 and HS2 appear on the display while the handset is charging. Ô

The second handset supplied with 43-3598 is already registered at the factory so you do not need to register it. Other handset(s) must be registered before use. To register, simply place the handset on the base until you hear the confirmation tone. If you do not hear the confirmation tone, register the handset again.

You can use the optional handsets in the same way as the base handset with a few exceptions. The

30

Image 30
Contents GHz Multi Handset Expandable Cordless Telephone With Call Waiting/Caller IDImportant Safety Instructions ContentsCall Waiting Deluxe Battery Safety Instructions Save These Instructions IntroductionInstalling Your Telephone On a DesktopSelecting a Location ∀ Caution ∀ On a Wall Plate Connecting and Charging the Battery Pack On a WallInstalling Your Telephone Setting the Dialing Mode Setting the Ringer VolumeSetting the Ringer Tone Turning Auto Talk ON/OFFTurning Caller ID/CALL Waiting Storing Your Area CodeSelecting the Language Making and Receiving Calls Ringer MuteUsing Redial Adjusting the HANDSET’S VolumeUsing Mute Using FlashUsing Tone Services on a Pulse Line PagingVoice Mail Waiting Indicator Using a HeadsetMemory Dialing STORING/EDITING Data in the Phonebook Search A-Z/#/∃, and Store select appearMemory Full Entering a Pause Reviewing Names and Numbers in the PhonebookCHAIN-DIALING Service Numbers Storing a ONE-TOUCH Speed Dial NumberDialing a Number in Memory Testing Stored Emergency Numbers Turning the Distinctive Ringer ON/OFFDeleting a Number Using Caller ID Call Waiting Deluxe ServiceAnswer/Drop 1st appears Using Ask to Hold Using ConferenceReviewing Caller ID Records Caller ID Messages ADDING/DELETING the Area CodeDialing Numbers from a Caller ID Record Deleting a Single Record Deleting Caller ID RecordsStoring a Caller ID Record in Memory Deleting ALL RecordsUsing AN Optional Handset Charging the Battery PackMaking and Receiving Calls Caller ID/CALL WaitingService and Repair CareTransferring a Call Troubleshooting Problem SuggestionFCC Statement FCC Wants YOU to KnowSurge Protection FCC Wants You to KnowLimited One-Year Warranty Information