Radio Shack 43-3529, 43-3598 owner manual On a Wall, Connecting and Charging the Battery Pack

Page 9

On a Wall

You need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.

1.Drill two holes 315/16 inches (100 mm) apart. Then thread a screw into each hole, letting the heads extend about 1/8 inch (3 mm) from the wall.

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Insert the supplied AC adapter's barrel plug into the DC IN 9V jack on the back of the base.

4.Route the adapter and modular cords through the grooves on the bracket.

5.Align the base's keyhole slots with the mounting screws and slide the base downward to secure it.

6.Plug the modular cord’s other end into the phone jack, and plug the adapter into a standard AC outlet.

7.Push up on the handset holder. Then lift and remove it. Turn it over and rotate it so that the oval-shaped indention is at the bottom. Then slide it down into its slot. Snap it back into place so that it holds the handset.

8.Lift the base’s antenna to a vertical position.

CONNECTING AND CHARGING THE BATTERY PACK

The phone comes with a rechargeable nickel metal hydride (Ni-MH) battery pack. Before using your phone, you must install the battery pack. Then charge it for about 12–15 hours.

Installing Your Telephone

9

Image 9

Contents With Call Waiting/Caller ID GHz Multi Handset Expandable Cordless TelephoneContents Important Safety InstructionsCall Waiting Deluxe Battery Safety Instructions Introduction Save These InstructionsInstalling Your Telephone On a DesktopSelecting a Location ∀ Caution ∀ On a Wall Plate On a Wall Connecting and Charging the Battery PackInstalling Your Telephone Setting the Ringer Volume Setting the Dialing ModeTurning Auto Talk ON/OFF Setting the Ringer ToneStoring Your Area Code Turning Caller ID/CALL WaitingSelecting the Language Ringer Mute Making and Receiving CallsUsing Mute Adjusting the HANDSET’S VolumeUsing Redial Using FlashPaging Using Tone Services on a Pulse LineVoice Mail Waiting Indicator Using a HeadsetMemory Dialing Search A-Z/#/∃, and Store select appear STORING/EDITING Data in the PhonebookMemory Full Reviewing Names and Numbers in the Phonebook Entering a PauseCHAIN-DIALING Service Numbers Storing a ONE-TOUCH Speed Dial NumberDialing a Number in Memory Testing Stored Emergency Numbers Turning the Distinctive Ringer ON/OFFDeleting a Number Call Waiting Deluxe Service Using Caller IDAnswer/Drop 1st appears Using Conference Using Ask to HoldReviewing Caller ID Records Caller ID Messages ADDING/DELETING the Area CodeDialing Numbers from a Caller ID Record Storing a Caller ID Record in Memory Deleting Caller ID RecordsDeleting a Single Record Deleting ALL RecordsCharging the Battery Pack Using AN Optional HandsetCaller ID/CALL Waiting Making and Receiving CallsService and Repair CareTransferring a Call Problem Suggestion TroubleshootingFCC Wants YOU to Know FCC StatementFCC Wants You to Know Surge ProtectionInformation Limited One-Year Warranty