To put the phone on a slant, insert the clips into the middle clip slots. Then, tilt the bracket down so the tabs click into the upper tab slots.
2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.
3.Plug the modular cord’s other end into a modular phone line jack.
4. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
5.Route the
adapter’s cord through the strain relief slot on the back of the base.
6.Plug the adapter into a standard AC outlet. ∀
7.Lift the base's antenna to a vertical position.
∀ CAUTION ∀
You must use a Class 2 power source that supplies 9V DC and delivers at least 350 mA. Its center tip must be set to positive and its plug must fit the phone's DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.
Installing Your Telephone
7