CONNECTING AND ADJUSTING THE HEADSET
1.Insert the tabs on the headset holder into the slots on the back of the base and snap the holder into place.
2. Insert the headset’s plug into the jack on the side of the keypad.
3. Place the headset on your head with the earpiece over either ear.
4. Adjust the headset band until it rests with almost no pressure on your ear and the top of your head.
5.If the headset is loose, press in slightly to tighten it. If it is tight, gently pull the headset band out to loosen it.
6.Hold the headset in place and adjust the microphone boom until it is about even with (but not in front of) your mouth. Experiment until you find the most comfortable position.
Caution: The microphone boom swivels on the headset. Do not bend the microphone boom while you adjust it.
Note: When you are not using the headset, place it on the headset hanger. Otherwise (if you set it on a flat surface, for ex- ample), you might have to repeat these adjustments.
Preparation | 13 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|