5.You can write down the stored numbers on the memory index card underneath the base.
Note: If you hear three short beeps, you did not store the num- ber successfully. Start again from Step 1.
Entering a Pause in Memory Number
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, if you do, you should also store a pause after the access code to allow the outside line time to connect. After entering the access code, press REDIAL/PAUSE to enter a
Dialing a Stored Number
1.Press L1 or L2.
2.When you hear the dial tone, press MEMORY, then the memory location number
Chain-Dialing Service Numbers
For quick recall of numbers for special services (such as alter- nate long distance or bank by phone), store each group of num- bers in its own memory location.
To call special services, dial the service’s main number. At the appropriate place in the call, press MEMORY, then the number for the location where the additional numbers are stored.
Operation | 21 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|