Radio Shack 2-Line 900 MHz Handsfree Cordless Phone owner manual Using Flash

43-1701.fm Page 19 Wednesday, September 20, 2000 8:48 AM

USING FLASH

FLASH provides the electronic equivalent of a switchhook signal for special phone services such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect your current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by-phone, require tone signals. If you have pulse service, you can still use these tone services by following these steps.

1.Dial the service’s main number.

2.When the service answers, press ∗/TONE. Any additional numbers you dial are sent as tone signals.

3.After you complete the call, press L1 or L2. The phone automatically resets to pulse dialing.

USING PAGE

You can send a page to the keypad to locate it when it is away from the base and not in use.

1.Press PAGE on the base. The keypad rings for about 15 seconds.

Operation 19