Remote Commands
Press: | To: |
|
|
[0 | Set the TAD to not answer |
| calls for both lines. The TAD |
| says “Line 1 is off, line 2 is off.” |
|
|
[1 | Set the TAD to not answer |
| calls only for line 1. The TAD |
| says “Line 1 is off.” |
|
|
[2 | Set the TAD to not answer |
| calls only for line 2. It says |
| “Line 2 is off.” |
|
|
00 | Set the TAD to answer calls |
| for both lines. It says “Line 1 is |
| on, line 2 is on.” If no OGM 1 |
| is recorded in line 1, it says |
| “You have no announcement |
| one in line 1,” and sounds four |
| beeps, then says “Line 2 is |
| on.” If no OGM 1 is recorded |
| in line 2, the TAD says “Line 1 |
| is on, you have no announce- |
| ment one in line 2.” then |
| sounds four beeps. |
|
|
01 | Set the TAD to answer calls |
| only for line 1. It says “Line 1 is |
| on.” If no OGM 1 is recorded |
| in line 1, it says “You have no |
| announcement one in line 1.” |
| and sounds four beeps. Press |
| 81[ to record OGM 1. |
02Set the TAD to answer calls only for line 2. It says “Line 2 is on.” If no OGM 1 is recorded in line 2, it says “You have no announcement one in line 2.” and sounds four beeps. Press 82[ to record OGM 1.
Press: | To: |
|
|
|
|
#0 | Set the TAD to announce only |
| for both lines. It says “Line 1 is |
| |
| |
| is recorded in line 1, it says |
| “You have no announcement |
| two in line 1.” Then it sounds |
| four beeps and says “Line 2 is |
| |
| is recorded in line 2, it says |
| “Line 1 is |
| have no announcement two in |
| line 2.” Then it sounds four |
| beeps. |
|
|
#1 | Set the TAD to announce only |
| for line 1. It says “Line 1 is |
| |
| recorded, it says “You have no |
| announcement two in line 1.” |
| Press 91[ to record OGM2. |
|
|
#2 | Set the TAD to announce only |
| for line 2. It says “Line 2 is |
| |
| recorded, it says “You have no |
| announcement two in line 2.” |
| Press 92[ to record OGM2 |
|
|
2, then | Play all messages in the |
line num- | selected line. If no message is |
ber (0, 1, | recorded, the TAD says “You |
2) | have no messages in line x.” |
(0 for both | (where x is the line number). If |
lines, 1 for | no messages are recorded in |
line 1, and | both lines, the TAD says “You |
2 for line | have no messages in line 1, |
2) | and no messages in line 2.” |
|
|
18