American Megatrends MAN-STOR-ITX27-CLI Local and Replicated Snapshot validation

Chapter Two: Command Set 43
Local and Replicated Snapshot validation
These commands are used as part of snap validation.
enable
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
enable -t local -c Cont0 -v Volume0 snapvalidation
This will enable local NAS snap
validation for the given NAS
volume. Once enabled, it will be
in “resumed” state by default –
meaning ALL scheduled snaps will
be validated, both already present
and those that will be created new.
disable
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
disable –t local -c Cont0 -v Volume0
snapvalidation
This will disable local NAS snap
validation for already enabled NAS
volume.
pause
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
pause -t local -c Cont0 -v Volume0snapvalidation
This pause validation of NAS
snapshots for already enabled NAS
volume.
resume
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
resume –t local -c Cont0 -v Volume0snapvalidation
This will resume validation of
NAS snapshots for already paused
(enabled) NAS volume.
get
snapvalidation
-t/--type local
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
get -t local -c Cont0 -v Volume0snapvalidation
This will return the status – paused
/ resumed of the given NAS
Volume for snap validation. It will
also return the list of snapshots that
are validated so far with the status
(passed / failed)
list
snapvalidation
-t/--type local
-x/--xml
Example:
list -t local snapvalidation
This will return the list of NAS
volumes that are enabled for NAS
snap validation, along with the
current status – paused / resumed.
resume
snapvalidation
-t/--type (SRP/HA)
-c/--containername <containername>
-v/--volumename<volumename>
-x/--xml
Example:
resume -t SRP -c Cont0 -v Volume0 snapvalidation
resume -t HA -c Cont0 -v Volume0 snapvalidation
This will resume replica validation
for the given volume or volumes
SRP/HA. The remote system
information will be taken from the
given replica pair itself, so no need
to add them separately.
SRP – Sync replica module
HA – High availablility module
pause
snapvalidation
-t/--type (SRP/HA)
-c/--containername <containername>
Pauses the already running
SRP/HA replica validation of given