StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User’s Guide
6
Then, to enable the target, use the syntax below:
CLI>enable –-type or –t tgt
–-targetname or -n sanvol0
iscsi <Enter>
Example: enable –t tgt –n sanvol0 iscsi
Next step is to activate a port for iSCSI traffic.
CLI>activate –-type or –t portal
–-ipaddress or -p 10.0.0.100
–-portaltag or -g 1 iscsi
Example: activate –t portal –p 10.0.0.100 –g 2 iscsi
We recommend that you assign different portal tags to the two portals if they are on different subnet s.