UPS Configuration
These commands configure the UPS for power management.
Command | Argument | Description |
get UPS | Displays the existing UPS | |
| configuration. | |
get UPS | Display the monitoring | |
| configuration for the configured | |
| UPS devices. | |
set UPS | Disables automatic shutdown. | |
|
| |
set UPS | Sets the UPS configuration to | |
| given values. The enable mode is | |
| to denote the shutdown option. | |
| Timeout should be given in | |
| minutes. Battery is the minimum | |
| battery value below which the | |
| For example: set | shutdown is triggered Mode checks |
|
| whether it set to master or slave. |
|
| Note: |
|
| Minimum Battery value should be |
|
| between 0 and 100 % |
|
| Timeout value should be between |
|
| 0 and 1000 minutes |
set UPS | Sets the UPS configuration to | |
| given values. The battery value | |
| indicates the minimum battery | |
| value at which the alert has to be | |
| generated. Timeout should be | |
| given in minutes. Mode is set to | |
|
| slave and the masterip is IP |
| For example: set | Address of the master. |
| ups | Note: |
|
| Minimum Battery value should be |
|
| between 0 and 100 |
|
| Timeout value should be between |
|
| 0 and 1000 |
config UPS | Displays currently configured | |
| driver for UPS monitoring. | |
config UPS | Displays list of available drivers. | |
|
| |
config UPS | Sets driver to use with UPS | |
| monitoring. | |
| Driver number is from list obtained | |
| For example: config | from |
|
| Port value: |
|
| 1 – COM1 |
|
| 2 – COM2 |
|
| u - USB |
Chapter Two: Command Set 29