StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User’s Guide

12

Firewall Configuration

These commands configure the network firewall options.

Command Argument Description
add firewall -a/--allow or
-b/--block
-i/--ip <ipaddress>
-m/--mask <netmask>
-p/--proto {icmp}
-x/--xml
Add allowed or blocked firewall
rule with given parameters for the
ICMP protocol.
add firewall -a/--allow
-b/--block
-i/--ip <ipaddress>
-m/--mask <netmask>
-s/--sport <start-port>
-e/--eport <end-port>
-p/--proto {tcp/udp}
For example: add –a –i 10.10.1.1 –s 1200 –e 5000 –
p tcp firewall
Add allowed or blocked firewall
rule with given parameters for TCP
and UDP protocols.
edit firewall -a/--allow or
-b/--block
-r/--rule<ruleno>
-i/--ip <IP address>
-m/--mask <net mask>
-p/--proto { icmp}
-x/--xml
For example: edit -a -i 10.0.0.218 -r 1 -m
255.255.255.255 -p icmp -x firewall
Modifies specified allowed or
blocked firewall rule with given
rule number to the given values for
ICMP.
delete firewall -a/--allow or
-b/--block
-r/--num <rule number>(obtained when viewing the
list of firewalls via the list command below)
-x/--xml
For example: delete -b -r 1 -x firewall
Deletes allowed or blocked firewall
rule with given rule number.
edit firewall -a/--allow or
-b/--block
-r/--rule<ruleno>
-i/--ip <IP address>
-m/--mask <net mask>
-s/--sport <start port>
-e/--eport <end port>
-p/--proto {tcp/udp}
-x/--xml
For example: edit -a -i 10.0.0.218 -r 1 -m
255.255.255.255 -s 2000 -e 3000 -p udp -x firewall
Modifies specified allowed or
blocked firewall rule with given
rule number to the given values for
TCP or UDP.
list firewall Lists all the blocked and allowed
firewall rules.
get firewall -c/--count
-x/--xml
For example: get -c -x firewall
Retrieves the count of allowed or
blocked firewall rules.