Lucent Technologies Cajun M770 manual Disabled

Field Name	Description
System Name	Logical name of the system as defined on the SNMP
	agent of the device.
Type	The agent type.
Upper Backplane	The configuration of the upper backplane of the
Configuration	Cajun M770 device, used for ATM switch modules.
	Possible values are:
	• Not Installed - No upper backplane is installed.
	The device can not operate as an ATM switch.
	• Single Domain - The upper backplane supports a
	configuration of one ATM switch for all 14 slots.
	• Dual Domain - The upper backplane supports a
	configuration of two separate ATM switches.
	One switch includes slots 1 - 7, the other switch
	includes slots 8 - 14.
Use Switches (Mode)	The state of the usage of hardware switches. The
	mode is set to use switches (on) or not to use
	switches (off).
VIDP	The state of VIDP (VLAN Information Distribution
	Protocol). Possible states are “enabled” and
	“disabled”.
	For more information refer to VIDP on page 13 of
	The Reference Guide.
VLAN Bridging	VLAN Bridging allows a station on one VLAN to
	communicate with a station on a another VLAN
	using the bridging capabilities of the M-MLS router.
	To enable this feature, the M-MLS router must be
	configured to enable bridging between specific
	VLANs.
	Possible values of the VLAN Bridging field are:
	• enabled - If bridging has been configured on
	the M-MLS router, the switch allows
	communication between the VLANs specified in
	the M-MLS router.
	• disabled - The switch does not allow inter-
	VLAN communication.

Cajun M400 Manager User’s Guide 73