into the handset, lift the handset, listen for dial tone and dial the number. Speak into the handset and adjust your volume. To end the call, replace the handset to the base.
3.If you are using the 3.5mm Audio jack and want to speak into the speakerphone, press the Speaker key, listen for dial tone and dial the number. Speak into speakerphone (the conversation will be heard through both your audio equipment and over the speakerphone) and adjust your volume. To end the call, press the Speaker key again on the base.
4.If you are using the 2.5mm Telephone headset jack for total
Dialing from Standby Mode
You can enter the desired phone number in standby mode, which allows you to verify the number before dialing. If you have the TALKING DIALING function turned ON, the number will be announced as you dial (see page 24 for more information). Follow these steps:
1.Enter a telephone number (up to 32 digits) and verify it is correct. If you make a mistake while entering a number, press the Clear soft key to delete it.
2.When the number appears correctly, lift the handset or press the Speaker key and it will dial.
Dialing from the Caller ID List (see page 37)
Dialing from the Redial List (see page 28)