ClearSounds CSC1000 manual Screening Calls, Incoming Message ICM

and held during the whole process.

2.Release the MEMO key to end the recording.

Screening Calls

1.When the answering machine answers the call, listen while the caller leaves a message.

2.To speak to the caller, pick up the handset or press the Speaker key.

The answering machine automatically stops recording when you activate the handset or speakerphone.

TIP: Make sure the volume on the phone is set loud enough to hear your incoming calls.

Incoming Message (ICM)

When a call is received and the TAM is ON, the machine will play the outgoing message, and then perform message recording. The process is as follows:

After N times ringing, the phone enters answer-record mode automatically and starts to play the outgoing message. The caller can record after the tone.

To play the messages, press the Start Message key [►▌■]. The speakerphone will announce “You have N new message(s)” or “You have N old message(s)”. The messages will be played one by one. During the process you can perform the following steps:

Press the [ DEL ] key to delete the current message.

Press the [ ▌◄◄ ] key once to re-play the current message.

Press the [ ▌◄◄ ] key twice to play the previous message.

42 – ENGLISH