2.Press the Prog key, the display will show
3.Press one of the Memory dial keys, the display will show “Saved”.
4.Repeat for each Memory dial key you want to use.
After storing the 8 Photo Memory Numbers, you may want to utilize the Memory Card to write down the name or phone number that corresponds with each Photo Key. The Memory Card is located on the right side of the phone.
Dialing from Memory Numbers
1.In standby mode, press one of the memory dial keys, the display will show the corresponding number. If you selected the wrong memory dial, either select the correct memory dial or press the Clear soft key repeatedly until you get back to the main screen.
2.Lift the handset or press the Speaker key and the phone will begin to dial.
NOTE: Press and hold any memory key for two seconds and the speakerphone will turn on and automatically dial.
NOTE: Entering a new number in the same location will automatically erase the previous number.
We suggest that you program the emergency number with your local Police Station, Fire Station, Doctor or Hospital. DO NOT PROGRAM 911 into any memory keys.
Clearing Memory Numbers
1.Press the Prog key in standby mode, the display will show
2.Press the desired Memory dial key that you want to delete and then the display will show “Saved”. This means the number has been cleared.