Avaya manual Resetting and Power Cycling the 1692 IP Conference Phone

Page 25

 

Resetting and Power Cycling the 1692 IP Conference Phone

 

 

Problem/Symptom

Suggested Solution

 

 

Characters do not appear

See Phone does not activate after a power interruption, above.

on the Display screen

Check all lines into the phone to ensure that it is properly

 

connected.

 

Check the power source to ensure that your phone is

 

receiving power.

 

If these suggested solutions do not resolve the problem, reset or

 

power cycle the phone with your system administrator’s

 

assistance.

 

 

Audio quality is poor.

Various network problems might be causing the problem.

Specifically, you hear an

Contact your LAN Administrator with as complete a description

echo, static, sudden

of the problem as possible.

silences (gaps in speech),

 

clipped or garbled speech.

 

 

 

No dial tone

Ensure that the cords into the phone are securely connected.

 

Note that there might be a slight operational delay if you unplug

 

and reconnect the phone. Reset or power cycle the phone with

 

your system administrator’s assistance.

 

Contact your system administrator if these steps do not produce

 

the desired result.

 

 

Phone does not ring

Use the Up/Down Volume keys to set your ringer volume to a

 

higher level. Verify that the “Do Not Disturb” feature is turned off,

 

using the Select key and the Up/Down Scroll keys to scroll down

 

to that item. From another phone, place a call to your extension

 

to test the ringer volume.

 

 

A feature does not work as

Verify the procedure and retry. For certain features, you must

indicated in this guide (for

place the phone off-hook first.

example, the Redial key

Contact your system administrator if this action does not

does not operate as

produce the desired result. Your phone system might have been

described)

specially programmed for certain features applicable only to

 

your installation.

 

 

All other IP Phone

Contact your system administrator.

problems

 

 

 

Resetting and Power Cycling the 1692 IP Conference Phone

Reset your phone when other troubleshooting suggestions do not correct the problem or after being advised to do so by your system administrator. The basic reset procedure can resolve most problems.

1692 IP Conference Phone User’s Guide

Nov 2009 25

Image 25
Contents Release User’s Guide IP Conference PhoneTrademarks Contents Safety Notices Index How to Use This Document Issue DateAbout This Guide OverviewConventions Used Document OrganizationConference Related Documents About This Guide IP Conference Phone User’s Guide Nov Introduction Introducing Your Avaya 1692 IP Conference PhoneAvaya 1692 IP Conference Phone Phone Components Description Icon Description Component DescriptionExtension Microphones General Notes on Use of the 1692 IP Conference Phone Using Your Avaya 1692 IP Conference PhoneMaking Calls Receiving Calls Call Handling FeaturesEnding Calls Holding Calls Dropping Calls Changing the VolumeServer Administered Features Page Avaya 1692 IP Conference Phone Options Accessing the Main MenuUpdating the Ring Tone Accessing System Information Setting the Display ContrastAccessing System Information Page Tones Meaning Interpreting Ringer TonesProblem/Symptom Suggested Solution Basic Troubleshooting ChartResetting and Power Cycling the 1692 IP Conference Phone If you want to Then Safety Notices CE and Vcci Mark Safety and Compliance Industry Canada ICNew Zealand Telepermit PTC General Warning Use of IP Networks through the PstnIP Conference Phone User’s Guide Nov 2009 Safety Notices 30 1692 IP Conference Phone User’s Guide Nov Contrast, updating IndexIndex 32 1692 IP Conference Phone User’s Guide Nov