Configure H.323 video endpoints on Communication Manager 6.0
Configure H.323 video endpoints on Communication Manager 6.0
This section provides a set of guidelines to configure video calling facility on H.323 endpoints with Communication Manager 6.0.
Configure Polycom VSX/HDX Series Video Conferencing Systems and V500/V700 Video Calling Systems
Use the following procedure to configure Polycom VSX/HDX video conferencing systems and V500 and V700 video calling systems. When setting up these systems, you will need to know the following:
●
●
●
●
●
●
●
Maximum number of VSX/HDX, V500, and V700 systems on your network.
PIN for each VSX/HDX/V500/V700 system. The PIN can consist of a maximum of eight numeric characters and is defined by the System Administrator.
The key code that combines the Avaya option with any other Polycom options.
If the VSX/HDX system has the multipoint option or IMCU option. If so, you must combine the Polycom Software License for this capability with the Avaya Option Polycom Software License to create a single Key Code to input into the unit.
IP address of the voice system IP codec sets you want to use
IP network regions you want to use
AVTS R 6.0 Quick Setup | For feedback, use document@avaya.com | August 2010 14 |