Avaya 16-300310 manual Configure H.323 video endpoints on Communication Manager

Page 20

Configure H.323 video endpoints on Communication Manager 6.0

Table 9: Configuring Ad-hoc video for Polycom RMX video Conferencing Bridge Platform

4Use the add video-bridgecommand to configure a video bridge for the RMX system. Set the following parameters:

Name to the name for this video bridge (for example, Ad Hoc video Bridge - RMX).

Max Ports to the maximum number of Ad-hoc conferencing ports you want to assign to this bridge. (The minimum you can enter is 3.) This is equivalent to the number of ports for Ad-hoc use on the associated RMX. You can use Max Ports to limit the extent of Ad-hoc usage of an RMX and thereby reserve ports for scheduled usage

Trunk Groups to the administered two-way ISDN H.323 trunk groups you added . All entries must be of the same carrier type (that is, all H.323 trunks)

Far End Resource Info :y

ID Range to the range of ports. The IDs you specify on this form must NOT be configured on the RMX. You must leave these IDs free for the factory to create its own conferences there. Note that AAR and UDP are not used to connect to these meeting room numbers. Conference IDs (and factory numbers) are completely independent of the dial plan

Priority Factory Number. This number represents the Entry Queue created on the RMX and corresponds to a priority conference service level (for example, 784 Kbps). The Priority Factory Number must NEVER be in the conference ID range. If this field is left blank, all conferences can use the bridge. However, priority conferences will try to find a video bridge that has a priority factory (if there is one)

Standard Factory Number. This number represents the Entry Queue created on the RMX and corresponds to a standard conference service level (for example, 384 Kbps). The Standard Factory Number must NEVER be in the conference ID range. If this field is left blank, non-priority conferences cannot use this video bridge. A conference started by a priority user with non-priority users may be moved to a priority bridge, and the non-priority users will connect to it and receive video

 

Note:

 

You must specify either a Priority Factory Number or a Standard Factory

 

Number. Do not leave both fields blank.

 

 

5

Create conference profiles for Ad-hoc (and Meeting Room) style conferences.

 

Note:

 

Ensure to choose Auto Layout under the video settings.

6Create the two entry queues (one for Ad-hoc conferences, and one for priority conferences).

AVTS R 6.0 Quick Setup

For feedback, use document@avaya.com

August 2010 20

Image 20
Contents Avaya Video Conferencing Solutions Quick Setup Federal Communications Commission Statement Part Downloading documents Overview PrerequisitesEnabling Multimedia IP SIP Trunking feature Enabling video on Communication ManagerPage Adding video to ip-codec-set Creating a template COREnabling Call Appearace feature Creating a templateAdding video users Creating a New User Profile Last Name First NameAdding video users Enabling Session Manager ProfileSurvivability Server None Port IP Click CommitNetwork Speed Auto 802.1X Authentication Disabled Configuring Avaya Series 1000 Video Conferencing EndpointsSetting General Parameters SIP registarion Through Proxy SIP Proxy Enabled SIP Registrar EnabledTCP Signalling Enabled Confirming Registrar Status Registrar Status RegisteredConfigure H.323 video endpoints on Communication Manager Configuring Polycom Endpoints Configuring Polycom EndpointsAdd Users/stations to Polycom endpoints IP Video ySettings Network IP Network Add users/stations to Polycom endpointsIP address of the IP board for the RMX system Mcudisplayname Polycom RMX-2000 Configure H.323 video endpoints on Communication Manager Configure H.323 video endpoints on Communication Manager Configure H.323 video endpoints on Communication Manager Display Capacity for Ad-hoc video Conferencing Display capacity for Ad-hoc video conferencingAdministering Polycom PathNavigator/ CMA Gatekeepers Administering Polycom PathNavigator/ CMA GatekeepersGatekeeper. Set the following parameters Configuring Avaya one-XCommunicator