Avaya 16-300310 manual Gatekeeper. Set the following parameters

Configure H.323 video endpoints on Communication Manager 6.0

Table 11: Administering Polycom PathNavigator/ CMA Gatekeepers

4	Use the add signaling-groupcommand to add a signaling group for the
	gatekeeper. Set the following parameters:
	●	Group Type: H.323
	●	IP video: y
	● Priority video. If you want all incoming calls to receive priority video
		transmissions, select y
	● Near-end Listen Port: 1719
	●	LRQ Required: y
	● Far-end Node Name to the name you entered for the gatekeeper in Step 3.
	● Far-end Listen Port: 1719
	● Far-end Network Region to the IP network region you specified in Step 2.
	● Direct IP-IP Audio Connections: y
	● IP Audio Hairpinning: y
5	Use the add trunk-group command to add a trunk group for the gatekeeper. Set the
	following parameters:
	●	Group Type: ISDN
	●	Carrier Medium: IP
	● Add members to this trunk group
6	Use the change signaling-group n command (where n is the signaling group
	you added in Step 4) to set Trunk Group for Channel Selection to the trunk group you
	added in Step 5.
7	Create a route pattern to the gatekeeper.
8	Configure the gatekeeper.

AVTS R 6.0 Quick Setup For feedback, use document@avaya.com August 2010 24