Configure H.323 video endpoints on Communication Manager 6.0
Configuring Ad-hoc Video Conferencing for a Polycom RMX Video Conferencing Bridge Platform
To configure Ad-hoc conferencing for a Polycom RMX video conferencing bridge platform, perform the following steps:
Table 9: Configuring Ad-hoc video for Polycom RMX video Conferencing Bridge Platform
1Perform the procedures in the section Table 8: Configuring Polycom RMX Series Video conferencing on Bridge Platform on page 13 to configure the Polycom RMX system.
2Enter display system-parameters customer-options to verify the Maximum Administered Ad-hoc video Conferencing Ports (page 2 of screen). The maximum number of Ad-hoc video conferencing ports allowed is the sum of the ports on your RMX systems. For example, if you have an RMX20 system and an RMX80 system, the maximum number of ports is 100.
3Enter change cos to set Ad-hoc video Conferencing (page 2 of screen) for the appropriate COS levels.
AVTS R 6.0 Quick Setup | For feedback, use document@avaya.com | August 2010 19 |
