Avaya 16-300310 manual

Configuration of SIP video endpoints on Communication Manager 6.0

Table 1: Enabling video on Communication Manager

3

Enabling video for the SIP signaling group

1.On System Manager, click Elements > Feature Management > Network -

Signaling Groups.

2.On the Signaling Groups page, click the arrow icon next to the Select Device(s) from Communication Manager List.

3.From the Communication Manager list, select the appropriate Communication Manager, and click Show List.

4.Select the appropriate Signaling Group Number and click edit to set parameters as mentioned below:

●IP Video : y

●Direct IP-IP Audio connections : y

●Initial IP-IP Direct Media : y

Alternatively:

On the Communication Manager SAT screen, enter change signaling-group n and set parameters as mentioned below:

●IP Video : y

●Direct IP-IP Audio connections : y

●Initial IP-IP Direct Media : y

Note:

Modifying the default Priority video option is not necessary. See Avaya video conferencing Solutions Networking Guide 6.0 for further details.

AVTS R 6.0 Quick Setup For feedback, use document@avaya.com August 2010 6