CALL ID
The top line of each record shows the date, time and the number of calls from that num- ber. The second line shows the caller’s name, and the third line shows the caller’s phone number.
To exit the Caller ID record display, press
CALL ID.
CALLER ID MESSAGES
Display | Description | |
|
| |
|
| |
New: XX | Shows the number of new | |
Total: XX | Caller ID records (records | |
you have not reviewed) | ||
| ||
| and the total number of | |
| records. | |
|
| |
Private | The caller has blocked the | |
Name or | Caller ID information. | |
Private |
| |
Number |
| |
Unknown | The caller is not within a | |
Name or | Caller ID service area. | |
Unknown |
| |
Number |
| |
Incomplete | Appears if there was an | |
Data | error during the transmis- | |
sion of Caller ID informa- | ||
| ||
| tion. Occasional errors are | |
| normal. If the phone fre- | |
| quently displays Incom- | |
| plete Data, contact your | |
| local telephone company | |
| or RadioShack store. | |
|
|
ADDING/DELETING THE AREA CODE
When the area code of the received call is the same as the one you stored (see “Storing Your Area Code” on Page 14), the Caller ID record does not show the area code. If it is different, the record shows the area code.
However, you can add or delete the area code on the display. With the record dis- played, press 3 to add or delete the area code. Pressing 3 again deletes or adds the area code.
When you dial the number or store it into memory, the answering system dials or stores the number as it appears on the dis- play.
DIALING NUMBERS FROM A CALLER ID RECORD
To dial a local number stored in a Caller ID record, recall the record, then press TALK. If it is a long distance call, press 1 (1 appears before the displayed number) before you press TALK. If you want to add or delete the area code, press 3 before you press TALK.
Note: If a Caller ID record does not contain a phone number (if it was blocked by the caller, for example), you cannot dial from that record.
STORING A CALLER ID RECORD TO MEMORY
1.Press CALL ID then VOL/CID 9or 8 to recall the record you want to store.
If you want to add or delete the area code, press 3.
2. Press MEM. Select Location
appears.
Caller ID Operation | 21 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|