Radio Shack 900 MHz owner manual Be sure the battery pack is correctly connected

Page 28

43-749.fm Page 28 Tuesday, September 5, 2000 11:24 AM

	Problem	Suggestion


	The answering system does not	Make sure the answering system is turned on.
	answer calls.
	answer calls.	Make sure the AC adapter is properly connected.
		Make sure the AC adapter is properly connected.

		Check all phone line connections.

	The answering system does not	REC TIME is set to ANN (announcement only). Set it to 1 or 4.
	record callers’ messages.
	record callers’ messages.	Delete messages if memory is full.
		Delete messages if memory is full.

	Low Battery flashes on the dis-	Be sure the battery pack is correctly connected.
	play every few seconds.

	You have an incoming call, but do not	Let the phone ring twice before you answer so the system has
	receive any Caller ID information.	time to record the Caller ID information.

		Check that the system is correctly and securely connected.

		Call your phone company to verify that your Caller ID service is
		active.

If you still have problems, disconnect the answering system. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take your phone to your local RadioShack store for assistance.

28		Troubleshooting

Image 28

Contents MHz Digital Spread Spectrum Digital Answering System Contents Answering System Operation Features Telephone FeaturesRead this Before Installation Answering System FeaturesImportant Caller ID Information Important Safety Instructions FCC StatementFm Page 7 Tuesday, September 5, 2000 1124 AM Installation Mounting the PhoneOn a Desk Top Connecting and Charging the Battery Pack Setting the Dialing Mode Setting the HANDSET’S Ringer TONE/VOLUME Setting the Number of RingsTurning the BASE’S Ringer on and OFF Setting the DAY/TIME Setting Auto TalkTurning Caller ID/CALL Waiting on or OFF Telephone OperationStoring Your Area Code Answering Calls with the Speakerphone Adjusting the Handset VolumeSelecting the Channel Switching Between the Handset and Speakerphone Using Both the Handset and SpeakerphoneUsing Flash Using RedialUsing a Headset PagingMemory Dialing Storing a Name and Number in MemoryEntering a Pause Editing or Deleting a Number in MemoryReviewing Memory Numbers Dialing a Memory Number Caller ID OperationReviewing Caller ID Records Caller ID Messages ADDING/DELETING the Area CodeDialing Numbers from a Caller ID Record Storing a Caller ID Record to MemorySetting the Record Time Answering System OperationDeleting Caller ID Records Selecting the Outgoing MessageScreening Calls Setting the Answering System to Answer CallsRecording Incoming Messages Recording a Conversation Recording a MemoPlaying Messages Deleting Messages Adjusting the Answering SYSTEM’S VolumeRemote Operation Using Remote Commands Troubleshooting Problem SuggestionBe sure the battery pack is correctly connected Care and Maintenance Replacing the Battery Pack FCC Wants YOU to Know LightningLimited One-Year Warranty