AKG Acoustics user manual Specifications, CS 5 BU

Section 9: Specifications

9.1 CS 5 BU

9.1.1 General

	Minimum	Nominal	Maximum	Unit
DC 48V / 3A IN
Input voltage	46	48	50	VDC
Power requirement	3	-	4	W
LINE IN (balanced)
Input level	-	0	+6	dBu
Impedance	-	20	-	kohms
TELEPHONE IN (balanced)
Input level	-	0	+6	dBu
Impedance	-	20	-	kohms
EFFECT IN (balanced)
Input level	-	0	+6	dBu
Impedance	-	20	-	kohms
TAPE IN (unbalanced, stereo*)
Input level	-	-10	-4	dBu
Impedance	-	20	-	kohms
EXT. LANG IN (balanced)
Input level	-	0	+6	dBu
Impedance	-	20	-	kohms
EXT. MIC. IN
Input level	-	-40	-34	dBu
Impedance	-	20	-	kohms
Phantom power	-	48	-	V
Output Levels
LINE OUT (balanced)	-	0	+6	dBu
TELEPHONE OUT (balanced)	-	0	+6	dBu
EFFECT OUT (balanced)	-	0	+6	dBu
TAPE OUT (unbal., stereo*)	-	-10	-4	dBu
Output Load Impedance	-	1	-	kohm
Output Frequency Range	20	-	20k	Hz
(-3dB)
Headphone Output
Power	-	90	200	mW
Load impedance	8	32	-	ohms
Frequency range (-3dB)	45	-	22k	Hz
Physical Dimensions
Height		1/1.75/44		U/in./mm
Width		18/482		in./mm
Depth inc. connector protrsion		4.25/108		in./mm
Weight		3.2/1450		lbs./g

* Use TRS plugs only. Connecting a TS plug would short the ring contact to ground and damage the device.

CS 5 User Manual - 43 -