GE 21029 manual Remote Access, Cordless Handset, Answering System Indicator

4.Press del button to erase all of the current CID records.The display shows DELETED followed by NO CALLS.

NOTE: Press the *exit key on the handset to return to the standby mode.

Remote Access

You may access the answering system with the cordless handset or from any tone-dial compatible telephone.

Cordless Handset

Use the corresponding handset keys just like you would use the base buttons (see “Answering System Setup”).The button functions are located on the handset above each number key. For example, to play messages:

•Press the FLASH/answerer button.The display shows ANSWERER REMOTE ACCESS.

•Press 2 (PLAY/STOP) followed by the mailbox number to play the message in that mailbox. For example, press 2 and 3 to play the message in mailbox 3.

•When you are finished listening to your messages, press the FLASH/ answerer button again.

Answering System Indicator

The answering system is active when the indicator on the base is on.

Screening Calls from the Handset

Use the handset to screen calls even when you can’t hear the answering system.

When the answering system picks up:

1.Press the FLASH/answerer button to access the answering system.

2.Listen as the caller leaves a message.

3.Press theTALK/END/call back or SPKR buttons to speak to the person or press the FLASH/answerer button to stop screening the call.

44