4.Press mute/prog button to confirm.
5.Press the cid/vol ( or ) button to scroll to the RING SELECT menu.
6.Press mute/prog button to enter the menu. RING SELECT 3 4 5 6TS shows in the display.
7.Use the cid/vol ( or ) button to scroll to the your selection.The default setting is 5.
8.Press the mute/prog button to confirm.You will hear a confirmation tone and the new setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there are NEW messages, OR the unit answers after the 5th ring if there are NO new messages. This allows user to access their answerer from another location and then hang up after 4 rings to save long distance charges.
Security Code (for answering machine)
You can access the answering system from a tone dialing telephone in another (remote) location.The security code is required for remote access, and it prevents unauthorized access to your answering system.
1.Make sure your phone is OFF (not in talk mode).
2.Press the mute/prog button to go to the main menu.
3.Press cid/vol ( or ) button to scroll to HANDSET SETUP.
4.Press mute/prog button to confirm.
5.Press the cid/vol ( or ) button to scroll to the SECURITY CODE menu.
6.Press mute/prog button to enter the menu. SECURITY CODE 1 2 3 shows in the display.
7.Use the
8.Press the mute/prog button to confirm.You will hear a confirmation tone and the new security code shows in the display.
NOTE: If you make a mistake, use the del button to backspace and erase the wrong digit.
26